In order to protect the cooler from breaking, the explosion-proof valve or bypass unloading circuit must be installed when the cooler is installed in the oil return circuit. The best way to use: using another small auxiliary to extract the oil tank inside the mature oil supply cooler, so as to become an independent loop.
In order to ensure that the cooler does not break, when the cooler is installed in the oil return circuit, it is necessary to install an explosion-proof valve or bypass unloading circuit. Recommend the best way to use: use another small pump, extract the oil tank internal heat supply cooler, so as to become an independent loop.
Product features of VGPE double pump:
■Low cost, high working pressure, simple structure, easily-maintain and installation.
■High flow capacity, saving horsepower, small size provide economic space.
■Maximum working pressure 210kgf/cm² (3000psi).
■Low noise level, endurance and hear generated is much less.
■Variable displacement pump and gear pump one are assembled with the same shaft directly.
Product introduction:
1. Installed in the pump oil suction side, prevent pumping oil into the dirt, protection system.
2. Prolong pump and system service life, reduce work continuously generated when the fault.
3. Specification complete, the flow range 40 l/min~800 l/min, filtration precision 100(standard products) can provide higher filtration precision.